Royal Quick-Grip™ Accessories

• A stop is used for accurate z-axis positioning of short workpieces within a collet.
• Rod length is easily adjusted according to workpiece parameters.
• Royal’s easy-to-install stop assemblies locate against a shoulder within the chuck body and are held rigidly in-place with radially-located screws.

• Royal Quick-Grip™ Extra-Depth Stops have a greater throat depth than the standard stops, enabling longer parts to be swallowed while minimizing protrusion beyond the collet face.
• For use with Royal Accu-Length™ and Pull-to-a-Stop Quick-Grip™ Collet Chuck Models.

• Ejectors are used in sub-spindle applications with Accu-Length™ Chucks to push finished workpieces into the part catcher upon completion.
• A hardened plunger rod and a bronze bushing work together to provide smooth, consistent operation.
• Design enables tip to be changed without removing ejector assembly from the chuck.
• Available in standard and compact models:
  • Standard Model  – for parts ranging in size from 0.81″ to 4.00″ dia.
  • Compact Model – for parts ranging in size from 0.18″ to 1.50″ dia.
• Easily customizable as workpiece configurations require.
• Pneumatic versions also available upon request.

For an alternative solution to an ejector, check out the Royal Grippex Coolant-Actuated Bar Puller. The Grippex, when fitted with special jaws, can be used to pull finished parts from a sub-spindle, eliminating the need for an ejector and freeing up the spindle bore to swallow longer parts.

• Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles:
  • Mount a larger chuck on a smaller spindle for increased capacity.
  • Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds.